Hammer

Description (physical):

Hammer. Wood | metal. L: 16.5 Inches, W: 3.75 Inches.

Location:
720 Sheridan Avenue,Wyoming,Cody,82414
Identifier:
1.69.5036
Institution:
Buffalo Bill Historical Center
Read more »

Creaser

Creator:
H.F. OSBORNE

Hard-wood rounded, handle; brass ferrule and metal end, curved tip. Tip is split in the middle - creating two ridges. Inscription on metal tip. Stamped or embossed figures on wood handle. See Osborne catalog #55, pg. 27.

Description (physical):

Creaser. Wood | brass | metal. L: 5.5 Inches, D: 1 Inches. On metal tip, L H.F. OSBORNE/ TRADE (figure)/ 2 (stamped or embossed igures [on wood handle]): "N/ (3 parallel horizontal lines intersected by a vertical line

Location:
720 Sheridan Avenue,Wyoming,Cody,82414
Identifier:
1.69.2872
Institution:
Buffalo Bill Historical Center

Safety Edger

Safety edger (c.f. 1.69.4666). Steel with brass ferrule and polished hardwood bulbed haft which is imprinted.

Description (physical):

Safety edger.. Steel | brass | hardwood. L: 5.625 Inches, W: 1.125 Inches, D: 1.125 Inches. Imprinted on bulbed haft: "N".

Location:
720 Sheridan Avenue, Cody, Wyoming, 82414
Identifier:
1.69.4671
Institution:
Buffalo Bill Historical Center

Stamp Tool

Creator:
Craftool Co.

Stamp tool. Used to decorate wet leather. Round metal tool with 2-1/2" checkered surface covering the middle section of tool. One end of tool is round and flat - used for hammering and the other end is shaped like a sharp pointed wedge with a smooth, flat, shiny surface. Inscription around end.

Description (physical):

Stamp tool. Metal. L: 4.375 Inches, DIAM: .25 Inches. Around end: CRAFTOOL CO./902

Location:
720 Sheridan Avenue, Cody, Wyoming, 82414
Identifier:
1.69.4007
Institution:
Buffalo Bill Historical Center

Stamp Tool

Creator:
Craftool Co.

Stamp tool. Used to decorate wet leather. Round metal tool with 2-1/2" checkered surface covering the middle section of tool. One end of tool is round and flat - used for hammering and the other end is a pear shape with line pattern. Inscription around end.

Description (physical):

Stamp tool. Metal. L: 4.25 Inches, DIAM: .375 Inches. Around end: CRAFTOOL CO./215

Location:
720 Sheridan Avenue, Cody, Wyoming, 82414
Identifier:
1.69.4278
Institution:
Buffalo Bill Historical Center

Stamp Tool

Creator:
Craftool Co.

Stamp tool. Used to decorate wet leather. Round metal tool with 2-1/2" checkered surface covering the middle section of tool. One end of tool is round and flat - used for hammering and the other end is a long wedge-shape with a line pattern. Inscription around end.

Description (physical):

Stamp tool. Metal. L: 4.25 Inches, DIAM: .625 Inches. Around end: CRAFTOOL CO./862

Location:
720 Sheridan Avenue, Cody, Wyoming, 82414
Identifier:
1.69.4219
Institution:
Buffalo Bill Historical Center

Curb Bit

Curb bit with concentric circles etched on cheek pieces where curved bit is attached. Nickel-plated iron. 2 large circular holes and one slotted hole for rope/chain.

Description (physical):

Curb bit. Nickel-plated iron. L: 8.25 Inches, W: 5.75 Inches, D: 3 Inches.

Location:
720 Sheridan Avenue, Cody, Wyoming, 82414
Identifier:
1.69.4540
Institution:
Buffalo Bill Historical Center

Stamp Tool

Creator:
Craftool Co.

Stamp tool. Used to decorate wet leather. Round metal tool with 2-1/2" checkered surface covering the middle section of tool. One end of tool is round and flat - used for hammering and the other end is a small flower with crossed leaves. Inscription around end.

Description (physical):

Stamp tool. Metal. L: 4.375 Inches, DIAM: .5 Inches. Around end: CRAFTOOL CO./616

Location:
720 Sheridan Avenue, Cody, Wyoming, 82414
Identifier:
1.69.4248
Institution:
Buffalo Bill Historical Center

Strap and Punch

Creator:
C.S. Osborne & Co.

Half-round. Metal tipped, U-shaped-head with sharp edge on end. Metal end is attached with brass ferrule to wooden handle. Inscription on top front of metal, on left side and back side of end. Meant to be used in hand and not hammered. See similar punches in Gomph catalog, pg. 3.

Description (physical):

Strap end punch. Metal | brass | wood. L: 6.5 Inches, DIAM: 1.25 Inches. On top front of metal vertically: 1 [horizontally on left side]: C.S. OSBORNE "and" CO [back side of end puncher metal]: A/B

Location:
720 Sheridan Avenue, Cody, Wyoming, 82414
Identifier:
1.69.2935
Institution:
Buffalo Bill Historical Center

Channeler

Creator:
C.S. Osborne & Co.

Channeler Edge tool with blade sticking out of brass attachment. One knob adjusts the metal blade and the other adjusts brass attachment. Inscription on left side of metal tip. Wooden handle has leather strip for hanging tool. Would cut slit in edge of leather while trimming edge. Probably used in harness making.

Description (physical):

Channeler. Metal | brass | wood | leather. L: 7 Inches, DIAM: 1.125 Inches. On left side of metal tip: "C.S.O. & Co"

Location:
720 Sheridan Avenue, Cody, Wyoming, 82414
Identifier:
1.69.2947
Institution:
Buffalo Bill Historical Center